Industrial Chiller Manufacturer

• Microprocessor Controller
• Nonferrous construction includes evaporator, pump, reservoir and piping to resist corrosion.
• Microprocessor controller provides diagnostics and accurate temperature control.
• Generously sized air-cooled condensers for industrial environments with ambient temperatures up to 115°F.
• Internal insulated polyethylene reservoir comes with large capacity and a removable top.
• Condenser discharge fan discharges air quietly through top of the portable industrial chillers.
• Hot gas bypass provides accurate capacity control and extends compressor life.
• Process Y-strainer protects the evaporator from contaminants in the water.
• Stainless steel brazed plate evaporator guards agains system freeze-up.
• Water regulating valve keeps refrigerant pressure constant (water-cooled units only).
• Evaporator freeze-up protection reduces potential for evaporator damage.
• Easily removable side panel allows for easy access to interior components.PDF Brochure : Download here

Units are made with the best available components such as premium quality solenoid valves, high flow pumps with leak-resistant silicon carbide seals and rugged incoloy heaters for years of maintenance free operation.

From 3/4 HP to 7 1/2 HP, 9 kW to 24 kW

Mold Temperature Control System
Accurate, dependable and easy-to-use
When you need a compact water temperature control unit for your application, you can count on Thermal Care. We understand how to meet your temperature control equipment needs.
The Aquatherm RQ Series Temperature Controllers provide the best available components such as cast pump volute/heater tube/mixing assemblies, high flow pumps with leak-resistant silicon carbide seals and rugged Incoloy sheathed heaters for years of maintenance free operation. Each control system comes with a large, use-friendly operator interface that provides a wide array of operational and diagnostic information.
- Free trials
- Available from stock

Hot Oil Temperature Controllers
The Oiltherm is designed to work with a wide range of high temperature applications in the 125°F to 575°F range. The Oiltherm assures high velocity oil flow across heater elements for
optimum heat transfer and fluid life. The oil is preheated to reduce viscosity before allowing the pump to run. A microprocessor allows customized settings for daily start/stop times and a temperature deviations alarm and a password lockout protects temperature set point.

Hot Oil Temperature Controller Features

• ·  6 kW to 36 kW

·  Leak proof centrifugal pump without rotating seals.
·  Automatic oil preheat to 100°F.
·  24hour/7day programmable preheat timer.
·  Easy-to-read digital display of "To Process" and "Set Point" temperatures.
·  Oil level safety prevents operation under low oil conditions.
·  Low watt density stainless steel heater elements provide long life and built-in standby.
·  Insulated hot oil lines and circuitry for energy efficiency and safety.
·  Control cabinet fan cooling to protect control systems and pump.
·  Convenient oil fill location allows oil to be added without removing cabinet.
·  Stainless steel reservoirs.
·  Stainless steel heat exchanger connections for corrosion free operation.
·  High temperature safety at 660°F.
·  Air-cooled pump requires no cooling water for operation.
·  Dual reservoir system includes operating and expansion reservoirs.
·  Complete insulation of oil circuit and operating reservoir maintains temperature and saves energy.
·  Easy access cabinet with removable top/side panel.
·  Premium quality solenoid valve assures precise temperatures.
·  Low oil level switch prevents operation under low oil conditions.

Thermal Care is at the leading edge of process cooling technology. TC Series Centrifugal Central Chillers use revolutionary, frictionless, magnetic bearing compressors to deliver optimum chiller performance and part load efficiencies. This translates into the quietest, most reliable, and most energy efficient chillers ever built. Models are available with either single or completely independent dual refrigeration circuits.

Central Chiller Equipment Features:

• 60 to 540 tons (water cooled and remote condenser models available)
• Powerful PLC Control System maintains stable and reliable operation of the chiler.
• C-CUL, 508A listed and labeled industrial control panel
• Rotary Circuit Breakers for each compressor
• Centrifugal Compressor Design

For more information : Click here PDF Brochure : Download here

MX Series Central Chillers use a Bitzer compact rotary screw compressor for greater reliability, energy efficiency and noise reduction. Each independent refrigeration circuit contains a brazed plate evaporator for greater chiller reliability and features an Allen-Bradley CompactLogix PLC to monitor, control and maintain stable and reliable operation of the chiller

For more information : Click here PDF Brochure : Download here

We build every TS Series Cool Central Chillers using energy-efficient, trouble free scroll compressors and are available with two, four or six compressors.

No one builds a better central liquid chiller than Thermal Care. Plus, you can add one of several integral pump/reservoir options to our TS Series Central Liquid Chillers for even greater system productivity. We build every TS Series liquid chiller using energy-efficient, trouble free scroll compressors and are available with two or four compressors.

For more information : Click here

PA Series Central Chillers come with either air-cooled scroll or rotary screw compressors. Designed to be used outdoors, these chillers are easy to install, operate and maintain.
PA Series Central Chillers come with either air-cooled scroll or rotary screw compressors. Designed to be used outdoors, these chillers are easy to install, operate and maintain.

Outdoor Chiller Features

• 10 to 421 tons (PACL Series – scroll compressor)
• 84 to 490 tons (PACS Series – rotary screw compressor)
• Microprocessor Control Panel
• Wide ambient condition operating range between -20°F and 125°F.
• Aeroacoustic fan design moves more air with less noise.
• Chlorine-free HFC134A refrigerant is environmentally friendly, not subject to phase-out, and has an ozone depletion potential (ODP) of zero. (PACS Series only)
• Cooler tubes are totally immersed in liquid refrigerant to reduce kW/hr operating costs. (PACS Series only)
• Compact and easy to install.

For more information : Click here

These lightweight fiberglass cooling towers are designed for long life and low maintenance at a competitive price. FT Series towers are of a counter flow design, carefully engineered with the optimum combination of heat transfer media, uniform air flow and even water distribution. They provide maximum air/water contact and low air pressure drop to assure efficient heat transfer while minimizing power requirements to save on operating costs.

The FC Series water cooling towers are designed for outdoor use in industrial manufacturing locations and come with the industry’s best warranty.

The FC Series cooling towers are designed for outdoor use in industrial manufacturing locations and come with the industry’s best warranty - ten years on the shell and five years on the complete tower – including the motor. Towers ship assembled with the fan motor and fan blade removed to prevent shipping damage.

Thermal Care's Hybrid Fluid Coolers Offer Significant Savings

If you're looking to reduce energy use, cut operating costs or provide clean water for your process cooling system then Thermal Care's new Hybrid Fluid Coolers are exactly what you need.

Most fluid coolers are closed–loop heat exchangers that cool process water using ambient air. Thermal Care's hybrid fluid coolers employ a unique adiabatic design that can provide leaving water temperatures in ranges similar to temperatures achieved with conventional evaporative cooling tower systems year-round.

• Units use much less water than conventional cooling tower systems
• Units can provide 85°F water year–round
• In cooler weather, units can provide "free cooling" by replacing the need for a chiller
• City water is nebulized into the entering air stream to lower the ambient air temperature for lower water temperature
• Nebulizing water mist system is separate from process water system
• No moisture on coils eliminates scale build up
• Polyurethane filters mean no water filters to replace
• Self-draining, glycol–free systems allows 46°F leaving water temperature without unit freeze up
• Remote control panel located inside facility operates fans, nebulizing mist system and a recirculation pump that maintains accurate water temperatures while optimizing unit performance
• DC brushless motors are quiet, save energy and increase reliability
• Advanced coil technology provides 20 percent more cooling capacity over standard coils
• High–efficiency spray system design prevents water from coming in contact with coils

For more information : Click here PDF Brochure : Download here